How heat pumps work
A short guide to ground source and air source heat pumps.
Moving heat, not making it
A heat pump works like a fridge in reverse. A liquid called a refrigerant picks up low-grade heat from the ground or the air, even on a cold day. A compressor squeezes that refrigerant, which raises its temperature. The heat then passes to the water in your radiators, underfloor pipes and hot water cylinder.
Because it moves heat rather than burning fuel, a heat pump can put more heat into the home than the electricity it uses. How much depends on the home, the design and the weather.
Ground source
Pipes filled with water and antifreeze are laid in trenches across the garden or dropped into one or more boreholes. The ground a few metres down stays at a fairly steady temperature all year. Trenches need space and access for a small digger; boreholes need less land but a drilling rig.
Air source
A fan unit outside draws air across a coil. It needs a clear spot on a wall or on the ground with room for air to move.
What changes inside
Heat pumps run at lower water temperatures than most boilers, so some radiators may need to be larger. Most homes need a hot water cylinder. An MCS installer works this out in a heat loss survey before quoting.